580mm | Autex GreenStuf® Polyester Masonry Wall Blanket

$ 7.85$ 24.95 p/m2 inc. GST

Buy GreenStuf Masonry Wall Blanket now to get FREE DELIVERY in Auckland (min. order 8 packs).

Clear selection
Actual Area (sq m)
Total Price
SKU: autex-greenstuf-polyester-masonry-wall-blanket Categories: , ,

Description

Autex GreenStuf® Polyester Masonry Wall Blanket

GreenStuf® Masonry Wall Blanket is designed for the thermal and acoustic insulation of strapped and lined walls in residential and commercial applications. GreenStuf® Masonry Wall Blanket will assist in meeting the energy efficiency and acoustic objectives of the Building Code. To ensure Building Code compliance Autex recommends that architects and building designers consult the relevant New Zealand standards before specifying thermal and acoustic insulation products.

Durability: GreenStuf® has a 50 Year Durability Warranty.

Moisture: GreenStuf® is not affected by moisture. Exposure to an atmosphere of 50°C at 90% relative humidity for four days showed moisture absorption by weight of less than 0.03%.

Thermal Performance: GreenStuf® Building Insulation Blankets declared thermal performance ratings have been laboratory tested to ASTM C 518-04. Increased thermal performance can be achieved with the use of reflective foils where a sufficient cavity space is provided. GreenStuf® Masonry Wall Blanket can be supplied with a reflective foil facing on request.

Hazardous Building Materials: GreenStuf® is non-hazardous.

Non-Flammable: GreenStuf® is classified as non-flammable.

Non-Corrosive: GreenStuf® polyester is pH7.8 (pH7 is neutral).

Non-Toxic, Non-Allergenic, Non-Irritant: There are no known hazards with the use or handling of GreenStuf® polyester.

Vermin: All GreenStuf® products are naturally resistant to vermin and insect attack.

Installation of GreenStuf Masonry Wall Blanket

We recommend that all thermal and acoustic insulation be installed in accordance with the manufacturer’s instructions (included in each GreenStuf® pack) AS 3999:1992 Thermal insulation of dwellings – Bulk Insulation, Installation requirements. Autex GreenStuf® Masonry Wall Blanket is manufactured from 100% polyester fibres and will not wick moisture. As such, GreenStuf® can be installed directly against concrete/ masonry walls. Timber strapping should be isolated from concrete/masonry with DPC. Thermal bridging must be controlled in accordance with the NCC Volume One J1.5. and NCC Volume Two 3.12.1.4. A thermal break is needed when a metal framing member directly connects the external cladding to the internal lining or the internal environment. A material with an R-Value of not less than R0.2, installed between the external cladding and the metal frame is required.

Acoustic Performance: GreenStuf® Masonry Wall Blanket will assist sound reduction through walls by reducing the resonating noise inside the construction cavity. A commonly overlooked acoustic problem is the effect of lining masonry walls. The Rw can be reduced by 6-8 points with strapping and lining on both sides of a concrete/masonry wall unless bulk insulation is used in the cavity.

Specification & Substitution: Autex specification documents are available through Masterspec® or can be downloaded from the manufacturer’s website www.autex.com.au.

Need advice or a quote?

GreenStuf Masonry Wall blanket is manufactured to order. If you need assistance or a quote on your upcoming project, don’t hesitate to contact our office at any time on 0800 697 742. We deliver to all major cities in New Zealand including Auckland, Christchurch, Wellington, Hamilton and Tauranga. Allow at least 2-4 business days from the time of confirming your order until delivery.


Additional Information
R-Value

R0.5, R1.0, R1.3

Width

580mm