No products in the cart.
Pink Batts Silencer Acoustic Wall Insulation
Pink Batts Silencer Wall Insulation is a lightweight glasswool insulation product designed for internal walls. The 560mm wide batts are designed to fit easily into standard New Zealand homes. These flexible batts can easily be cut to size if you have irregular wall joists.
Pink Batts Silencer is designed to meet the requirements of the New Zealand Building Code (NZBC).
PLEASE NOTE: This products are designed for internal walls where both thermal and acoustic insulation is required. Pink Batts Ultra Wall Insulation is recommended for external walls.
Features and Benefits of Pink Batts Silencer
- Sound absorbing insulation batts
- Reduce sound transmission between rooms to create a quieter and more relaxing home
- Internationally certified for Indoor Air Quality
- Will not easily burn in the event of a fire (non-combustible)
- Made from over 80% recycled glass
- New Zealand made
- Lightweight and easy to cut
Steps to achieving a quieter home
Installing quality high density acoustic wall insulation is only one of many ways to achieving a quieter home. Below are some additional tips which can help, and it starts at the design stage. Try to ensure your layout allows for different noise zones. Group rooms with similar noise levels together – e.g.
- bedrooms and studies
- lounge rooms, dining rooms, rumpus and home cinema or media rooms
- bathrooms, toilets, kitchens and laundries
Wherever possible, keep bedrooms as far away from living areas as possible, and consider the proximity of any noisy roads when determining the location of any bedrooms and living areas. Soft flooring such as carpets also help to reduce the noise levels within the home.
Correctly installing the insulation with no compression, gaps or folds is critical to ensure that the performance of the Pink® Batts® mid floor insulation is not compromised.
Following are some general guidelines which will help keep you out of trouble:
Prior to installation of your mid floor insulation, check for all hazards that may cause injury. Carry out repair work without delay. Ensure that there is adequate lighting to identify any hazards. Treat all electrical cables as live, and never hammer, staple or use cutting tools very close to electrical cables. Repair damaged, exposed or hanging cables immediately, and be very careful not to cut or expose cables and wires. Take care when working around other sharp objects (protruding nails, splinters etc.), pests (bees and wasps), loose boards and pipe work. Always seek professional advice if you are unsure how best to isolate the hazard or have a professional installer carry out the work on your behalf. Contact us if you would like a quote for professional installation.
Below is a list of recommended personal protective equipment and basic tools for DIY installation.
- Loose fitting, long sleeve clothing
- Step ladder
- Dust mask
- Knife and cutting board
- Rubber faced gloves
- Safety glasses
- rubber soled footwear
Pink Batts Silencer Product Downloads
Need advice or a quote?
At Pricewise Insulation we have years of experience supplying and installing thermal and acoustic insulation to the residential and commercial market. Don’t hesitate to contact us on 0800 697 742 or send an email to firstname.lastname@example.org. We look forward to working with you on you next project.